Description
This remote needs 2 working ignition keys for programming. If you don't have 2 working keys available to initiate programming, please contact an automotive locksmith as you are likely to get a better service for a more reasonable price. An automotive locksmith will program your new remotes or keys by hooking up an expensive scan tool to your vehicle's computer and making the vehicle learn the new remotes or keys.
Remote For Ford:
This remote features 4 buttons: Lock, Unlock, Panic and Trunk. This remote sends it's signals on a frequency of 433Mhz. This remote will work for your vehicle if your vehicle is equipped with factory keyless entry. This remote is tested before shipping and guaranteed to work. Comes with brand new battery and free tech support.
Programming Procedure:
- ADD KEY (Must have two working original keys):
1. Insert the first previously programmed coded keys into the ignition.
2. Turn the ignition from the 1 (LOCK) position to the 3 (RUN) position. Keep the ignition in the 3 (RUN) position for at least 3 seconds, but no more than 10 seconds.
3. Turn the ignition to the 1 (LOCK) position and remove the first coded key from the ignition.
4. Within 10 seconds of turning the ignition to the 1 (LOCK) position, insert the second previously coded key into the ignition.
5. Turn the ignition from the 1 (LOCK) position to the 3 (RUN) position. Keep the ignition in the 3 (RUN) position for at least 3 seconds, but no more than 10 seconds.
6. Turn the ignition to the 1 (LOCK) position and remove the second coded key from the ignition.
7. Within 20 seconds of turning the ignition to the 1 (LOCK) position and removing the previously programmed coded key, insert the new un-programmed key (new key/valet key) into the ignition.
8. Turn the ignition from the 1 (LOCK) position to the 3 (RUN) position. Keep the ignition in the 3 (RUN) position for at least 6 seconds.
9. Remove the newly programmed coded key from the ignition.
If the key has been successfully programmed, it will start the vehicle?? engine and will operate the remote entry system (if the new key is an Integrated Keyhead Transmitter). The theft indicator light will illuminate for 3 seconds and then go out to indicate successful programming.
If the key was not successfully programmed, it will not start your vehicle?? engine and/or will not operate the remote entry features. The theft indicator light may flash on and off. Wait 20 seconds and you may repeat Steps 1 through 8. If the failure repeats, bring your vehicle to your authorized dealer to have the new key(s) programmed.
To program additional new un-programmed key(s), wait 20 seconds and then repeat this procedure from Step 1.
The following vehicles can use this remote when equipped with the factory keyless entry system:
Ford Mustang (2013-2014).