Custom Key Fob CWTWB1U345 Ford 3 Button Remote Upgrade Ford Flipkey Look-Alike
Custom Key Fob CWTWB1U345 Ford 3 Button Remote Upgrade Ford Flipkey Look-AlikeTested and Guaranteed to Work
This custom key fob that looks like a Kia remote is programmed to imitate the Ford 3 button remote which has FCC ID's of CWTWB1U345, CWTWB1U331, GQ43VT11T, or CWTWB1U212.  If your vehicle uses the ford 3 button remote and an H92PT or compatible key with Texas 4D63 80 Bit transponder then it can use this.  Remote Programming ...
KEYDIYCustom 3010 H92 Flipkey

Custom Key Fob CWTWB1U345 Ford 3 Button Remote Upgrade Ford Flipkey Look-Alike

Tested and Guaranteed to Work

Select Your Vehicle
Item Specifics
Product Type
Custom Key Fob
315 MHz
Remote Programming
Code Type
Product Character
Vehicle Specific
RF Transmission
6 months

This custom key fob that looks like a Kia remote is programmed to imitate the Ford 3 button remote which has FCC ID's of CWTWB1U345, CWTWB1U331, GQ43VT11T, or CWTWB1U212.  If your vehicle uses the ford 3 button remote and an H92PT or compatible key with Texas 4D63 80 Bit transponder then it can use this. 

Remote Programming Instructions
1. Insert the keys in the ignition and turn the ignition switch from OFF to RUN, up to eight times within ten seconds, ending in OFF. When the vehicle has successfully entered programming mode, it will lock and then unlock all door locks automatically. 
(Note: The RUN position is as far as you can turn the key without cranking the engine.  If the door locks do not cycle indicating programming mode has been entered, try the procedure without doing step 1 and having the driver door closed.  If you still can’t get into programming mode after trying this numerous times both ways then you either do not have the factory keyless entry system or it is not functioning properly.  In many vehicles you should end in the RUN position and not the OFF position.  If you have anti-theft deterrent then before doing this step you should open the driver door and cycle the power door locks twice.  This means you press LOCK, UNLOCK, LOCK, UNLOCK.  Step ones says to turn from OFF to RUN up to eight times.  If the locks cycle before eight times then move onto step 2 immediately.  Do not continue cycling the ignition switch.)
2. Within 15 seconds, press ANY button on a keyless entry remote transmitter. The doors will lock and then unlock to confirm that each keyless entry remote transmitter has been activated. 
(Note: When the first keyless entry remote transmitter is programmed, all existing keyless entry remote transmitters are erased.)
3. Repeat step 2 immediately for each transmitter that will operate the vehicle including your old ones (if any.)
4. If the door locks do not respond for any keyless entry remote transmitter, wait 10 seconds and press the button again.
5. Turn the ignition switch to the OFF position or wait up to 30 seconds after step 2, to exit program mode. If a keyless entry remote transmitter has been activated, the vehicle may lock and unlock all doors one last time to confirm.

Key cutting
Any locksmith can cut the key to match a working key.  An automotive locksmith can cut the key if there is no working key.

Transponder Programming
If there are not two keys that already start the engine when turning in the ignition then an automotive locksmith must program the vehicle to accept the key after the key has been cut.  If there are two keys that start the engine already they can be used to add this key easily using these instructions:
1. Insert an existing key into the ignition.
2. Turn the ignition to ON (RUN) and back to OFF.
3. Remove the existing key and within 5 seconds insert the other existing key and turn it to ON (RUN) then back to OFF.
4. Insert the new key before 10 seconds have elapsed, and turn it to ON (RUN).  Leave it ON for 1 second and turn back to OFF.
5. The security light will light up for 3 seconds to indicate programming has been successful.

  • Battery Included
  • Free Tech Support
  • Guaranteed To Work
  • Tested Before Shipping
Application List
ImageSKU / Part NoApplicationDetailStockPriceAdd to Cart
 Custom3010-KD-B12-Blade19-Chip-4D63-80bitFord E-150 (2008-2014)with factory keyless entry$49.95BUY
+ -
 Custom3010-KD-B12-Blade19-Chip-4D63-80bitFord E-150 Econoline (2008)with factory keyless entry$49.95BUY
+ -
 Custom3010-KD-B12-Blade19-Chip-4D63-80bitFord E-250 (2008-2015)with factory keyless entry$49.95BUY
+ -
 Custom3010-KD-B12-Blade19-Chip-4D63-80bitFord E-350 Econoline (2008)with factory keyless entry$49.95BUY
+ -
 Custom3010-KD-B12-Blade19-Chip-4D63-80bitFord E-350 Super Duty (2008-2019)with factory keyless entry$49.95BUY
+ -
 Custom3010-KD-B12-Blade19-Chip-4D63-80bitFord Econoline Van (2010-2014)with factory keyless entry$49.95BUY
+ -
 Custom3010-KD-B12-Blade19-Chip-4D63-80bitFord Econoline Wagon (2010-2014)with factory keyless entry$49.95BUY
+ -
 Custom3010-KD-B12-Blade19-Chip-4D63-80bitFord Escape (2005-2006)with factory keyless entry$49.95BUY
+ -
 Custom3010-KD-B12-Blade19-Chip-4D63-80bitFord Explorer (2001)with factory keyless entry$49.95BUY
+ -
 Custom3010-KD-B12-Blade19-Chip-4D63-80bitFord Explorer Sport Trac (2001-2010)with factory keyless entry$49.95BUY
+ -
 Custom3010-KD-B12-Blade19-Chip-4D63-80bitFord F-150 (2004-2010)with factory keyless entry$49.95BUY
+ -
 Custom3010-KD-B12-Blade19-Chip-4D63-80bitFord F-150 Heritage (2004)with factory keyless entry$49.95BUY
+ -
 Custom3010-KD-B12-Blade19-Chip-4D63-80bitFord F-250 (2004-2010)with factory keyless entry$49.95BUY
+ -
 Custom3010-KD-B12-Blade19-Chip-4D63-80bitFord F-250 Super Duty (2004-2010)with factory keyless entry$49.95BUY
+ -
 Custom3010-KD-B12-Blade19-Chip-4D63-80bitFord F-350 (2004-2010)with factory keyless entry$49.95BUY
+ -
 Custom3010-KD-B12-Blade19-Chip-4D63-80bitFord F-350 Super Duty (2004-2010)with factory keyless entry$49.95BUY
+ -
 Custom3010-KD-B12-Blade19-Chip-4D63-80bitFord Freestar (2004-2007)with factory keyless entry$49.95BUY
+ -
 Custom3010-KD-B12-Blade19-Chip-4D63-80bitFord Freestyle (2006-2007)with factory keyless entry$49.95BUY
+ -
 Custom3010-KD-B12-Blade19-Chip-4D63-80bitFord Fusion (2006)with factory keyless entry$49.95BUY
+ -
 Custom3010-KD-B12-Blade19-Chip-4D63-80bitFord Ranger (2001-2010)with factory keyless entry$49.95BUY
+ -
 Custom3010-KD-B12-Blade19-Chip-4D63-80bitFord Windstar (2001-2003)with factory keyless entry$49.95BUY
+ -
 Custom3010-KD-B12-Blade19-Chip-4D63-80bitLincoln Mark LT (2006-2009)$49.95BUY
+ -
 Custom3010-KD-B12-Blade19-Chip-4D63-80bitLincoln Navigator (1998-2001)$49.95BUY
+ -
 Custom3010-KD-B12-Blade19-Chip-4D63-80bitMazda B2300 (2001-2008)with factory keyless entry$49.95BUY
+ -
 Custom3010-KD-B12-Blade19-Chip-4D63-80bitMazda B2500 (2001)with factory keyless entry$49.95BUY
+ -
 Custom3010-KD-B12-Blade19-Chip-4D63-80bitMazda B3000 (2001-2008)with factory keyless entry$49.95BUY
+ -
 Custom3010-KD-B12-Blade19-Chip-4D63-80bitMazda B4000 (2001-2008)with factory keyless entry$49.95BUY
+ -
 Custom3010-KD-B12-Blade19-Chip-4D63-80bitMazda Tribute (2005-2007)with factory keyless entry$49.95BUY
+ -
 Custom3010-KD-B12-Blade19-Chip-4D63-80bitMercury Mariner (2005-2006)$49.95BUY
+ -
 Custom3010-KD-B12-Blade19-Chip-4D63-80bitMercury Monterey (2004-2005)$49.95BUY
+ -
Return Policy


At RAK we make returns as easy as possible. Our mission is to provide you with the best products and the best service in the industry. We understand that sometimes, customers change their minds about products that they order or simply do not need them anymore. We also know that customers are cautious about Return Policies since they are often tricky and misleading. Our goal is to make the return or exchange process trustworthy and as simple as 1-2-3.


If for any reason you are not completely satisfied with your purchase, you may return the item within 30 days of delivery of your order. The following rules apply:

Products must be in the same condition we sent it in.

Shipping Fees are non-refundable.

All returns must be made by signing in, going to MY ACCOUNT, clicking order history, finding the order, click Return this item.There are few non-returnable products & services that may be offered on our website. It will indicate clearly in the product description if a different return policy applies.

Order cancellations can only be requested prior to shipment.


To return a product, you must first request a Return Merchandise Authorization (RMA) that is located in the MY ACCOUNT section next to each order item that you want to return. Once you've selected the items to return and the reason, you will be given return instructions.


There are 2 ways you can go about exchanging a product:

Option 1 (Slower) - Use the standard return procedure to request an RMA for the part you need exchanged. In your request please specify the exact item(s) you would like to exchange to. Upon receipt of your returned product we will process an exchange and ship the new part. If there is a difference in the price, you will be either refunded or charged the difference.

Option 2 (Faster) - Order the new part over the phone and request to include a prepaid label to send back the first purchase for refund.


We all know that accidents happen sometimes. If your product(s) will arrive defective, damaged, or simply incorrect, please contact our customer service department as soon as possible. Please do not attempt to use or install the part! We will send you a replacement part and provide you with a prepaid return label to return the defective part. Product(s) must be returned to us within 30 days. If the damage was caused by a shipping courier, we will schedule a damage pick up by the courier.


When you request a cancellation of an order or a part it may take up to 24 business hours to process your cancellation claim. This process may involve voiding orders in computer systems, removing items from backorder logs, having operations personnel pull items from production schedules and sometimes stopping orders at the shipping dock. Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of your cancellation.


After we accept your return, you will be issued a refund via the same payment method as you had originally used to place the order. The refund amount will be composed of the original purchase price minus shipping charges. You will be sent an email confirming receipt of the return and your credit. Please allow an additional 5-7 days for the credit to appear on your account.

Customer Reviews
Share your thoughts with other customers
Login to leave a review
Questions & Answers
Be first to ask a question