$$29.95Aftermarket Remotes \ Code AlarmPT-4-Clone
New Code Alarm PT-4-Clone Replacement Transmitter GOH-FOUR ELVATKC (new)Tested Remote, Guaranteed To Work
Extended warranty is available on the checkout page. This remote was used by many ford dealerships as a dealer installed upgrade. Systems that use this remote were installed by many alarm shops around the country in the late 90s early 00s.  The original FCC ID on the remote was GOH-FOUR.  Code Alarm recently redesigned the ...

New Code Alarm PT-4-Clone Replacement Transmitter GOH-FOUR ELVATKC (new)

Tested Remote, Guaranteed To Work

$29.95 Original Price: $64.95 54% off

Item #: Z1010E

Shipping: Item will be shipped before or on 10/11/2021

Add to Cart
Add to Wishlist
  • Create a New List
Item Specifics
Product Type
Regular Remote
315 MHz
Remote Programming
Item #

Extended warranty is available on the checkout page.

This remote was used by many ford dealerships as a dealer installed upgrade. Systems that use this remote were installed by many alarm shops around the country in the late 90s early 00s.  The original FCC ID on the remote was GOH-FOUR.  Code Alarm recently redesigned the remote with FCC ID ELVATKC. This is a Code Alarm Type 1 Remote, meaning it can be used to replace or be replaced by any Type 1 Keyfob.  This is a 315 MHz remote.  This remote has 4 buttons.  There is a 434 MHz remote with FCC ID GOH-FOUR that is easily confused with this one because it looks identical.  Code Alarm has made this remote with a few different button icons but they all operate the same way.  No matter which icons are on the remote you receive, it will work the same as any other.

Works on these Code alarm Systems: CSM2.5, CSM3, CSM4, ELITE1100, ELITE1500, ELITE2000SE, ELITE4000, ELITE4500, ELITE6500, ELITE911, ELITE950, ELITECOMPETITION, PRO100, PRO1000, PRO200, PRO3000, PRO3500, PRO5000, PRO5500, PRO7000, PRO750, RCS2, RKE1, SURESTARTRVS, SURESTARTRVSII, SURESTARTSE, and SURESTARTSE433.

Warning: There are two remotes with GOH-FOUR as an FCC ID.  One of them works on 315MHz and one of them on 434MHz.  You need to order the correct one or it won't work.  This one is for 315MHz only.

  • Guaranteed To work
  • Tested Before shipping
  • Battery Included
Additional Information


Most systems use this procedure:

Note: The system will retain the last 4 remote codes programmed.  The 5th remote knocks out the 1st, and so on...  This system has 1 button programming which programs all channels of the system.

1.  Turn the ignition key ON (turn key all the way forward without starting vehicle).
2.  Press and Hold the valet-programming-override button (located under dash). In approximately 10 seconds the system will chirp/flash parking lights 3 times.  Release the button.
3.  Press the #1 button (top left when key-ring hole is at bottom) on the remote you wish to program. The system will respond with a chirp.
4.  All other remotes (up to four) also need to be programmed at this time the same as in step 3.
5.  Turn ignition off to exit programming mode.

A system called CSM-3 uses this procedure:

Note: Each system module has four “slots”, or memory locations, to store transmitter codes, giving it the ability to operate from up to four transmitters. For proper operation, a transmitter code must be stored into each memory slot. When using less than four transmitters, follow the suggested programming parameters:
-One Remote Transmitter - Program four (4) times
-Two Remote Transmitters - Program each transmitter two (2) times
-Three Remote Transmitters - Program one transmitter twice, and each remaining transmitter once.
1. Press and hold the brake pedal. Turn the ignition on and off three (3) times, then release the brake pedal. If done correctly, the unit will respond by flashing the parking lights three (3) times. (From inside the vehicle, you will hear three (3) ‘clicks’ from the module.) This indicates that the unit has entered the programming mode.
2. Without pressing the brake pedal, press the LOCK button (button 1) on the remote transmitter to be programmed. The parking lights will flash once (one click from the module), indicating that the system has “learned” that remote transmitter.
3. Press the TRUNK button (button 3) on the same remote transmitter. The parking lights will flash twice (two clicks from the module), indicating that the
system recognizes the remote transmitter as four-button.
4. Repeat steps 2 and 3 for any additional transmitters or transmitter codes.
5. Press and release the brake pedal to exit the programming mode. Test all remote transmitters to ensure that they work properly.


Return Policy


At RAK we make returns as easy as possible. Our mission is to provide you with the best products and the best service in the industry. We understand that sometimes, customers change their minds about products that they order or simply do not need them anymore. We also know that customers are cautious about Return Policies since they are often tricky and misleading. Our goal is to make the return or exchange process trustworthy and as simple as 1-2-3.


If for any reason you are not completely satisfied with your purchase, you may return the item within 30 days of delivery of your order. The following rules apply:

Products must be in the same condition we sent it in. If the condition isn't in the same condition that we sent to you, then the refund amount will be less due to our cost to restore or refurbish the item. If it's not possible to restore or refurbish then the refund would be the value we could sell it for in the condition it is now in minus 20%. If you place a "Special Order" with us then there would be a 40% restocking fee.

Shipping Fees are non-refundable.

All returns must be made by signing in, going to MY ACCOUNT, clicking order history, finding the order, click Return this item.There are few non-returnable products & services that may be offered on our website. It will indicate clearly in the product description if a different return policy applies.

Order cancellations can only be requested prior to shipment.


To return a product, you must first request a Return Merchandise Authorization (RMA) that is located in the MY ACCOUNT section next to each order item that you want to return. Once you've selected the items to return and the reason, you will be given return instructions.


There are 2 ways you can go about exchanging a product:

Option 1 (Slower) - Use the standard return procedure to request an RMA for the part you need exchanged. In your request please specify the exact item(s) you would like to exchange to. Upon receipt of your returned product we will process an exchange and ship the new part. If there is a difference in the price, you will be either refunded or charged the difference.

Option 2 (Faster) - Order the new part over the phone and request to include a prepaid label to send back the first purchase for refund.


We all know that accidents happen sometimes. If your product(s) will arrive defective, damaged, or simply incorrect, please contact our customer service department as soon as possible. Please do not attempt to use or install the part! We will send you a replacement part and provide you with a prepaid return label to return the defective part. Product(s) must be returned to us within 30 days. If the damage was caused by a shipping courier, we will schedule a damage pick up by the courier.


A tracking number is provided with every order you place. Once the carrier’s status shows the package has been delivered we are not responsible for replacement orders!


When you request a cancellation of an order or a part it may take up to 24 business hours to process your cancellation claim. This process may involve voiding orders in computer systems, removing items from backorder logs, having operations personnel pull items from production schedules and sometimes stopping orders at the shipping dock. Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of your cancellation.


After we accept your return, you will be issued a refund via the same payment method as you had originally used to place the order. The refund amount will be composed of the original purchase price minus shipping charges. You will be sent an email confirming receipt of the return and your credit. Please allow an additional 5-7 days for the credit to appear on your account.

Customer Reviews
Share your thoughts with other customers
Login to leave a review
Questions & Answers
Be first to ask a question