491T Programming Instructions
To choose the correct programming instructions, go by the brand and model name of the system that is installed in your car. If you don't know the brand an model name of the system, look under the dash for the receiver. The brand and model name are usually on it.
Note: These systems we do not have copies of the installation manuals for. We would like to have them so we can be sure which programming procedure they use. If you can send us a good condition installation booklet that is one of these, we'll trade a remote for it: Automate 2 HF, Automate 3+, Automate 5+ HF, Automate 6 HF, Equalizer 1, Valet 519H, Valet 551R, Valet 552T, Python 625 HF, Python 650HF, Python 1000HF, Python 1500HF, Viper 150 HF, Viper 550HF, Viper C 70HF.
The systems below we do have the the manuals. So we're sure about these programming procedures.
Hornet 719T, Hornet 720T, WASP 718W Programming Instructions:
1. Power the system up. If the system is already owered up, it must be powered down before it will enter the Transmitter Learn Routine.
2. Within 5 seconds press button one on the first transmitter. The siren will chirp once.
3. Within 5 seconds press button one on the first transmitter AGAIN. The siren will chirp twice.
4. Within 5 seconds press button one on the first transmitter a THIRD time. The unit will generate one long chirp.
5. Repeat steps 2-4 for all transmitters to be learned. The system will learn up to four transmitters in this fashion. The Transmitter Learn Routine will automatically be exited if 5 seconds elapses without the unit receiving a transmitter code. The system will generate one short chirp followed by a long chirp when the Learn Routine is exited.
Hornet 725T, Hornet 730T, Sidewinder 3500, Sidewinder 4500HF, Sidewinder 6000HF, Viper 300 HF, Viper 300+, Viper 500 HF, Viper 600HF Programming Instructions:
1. Open driver's door.
2. Turn key to ON.
3. Press valet button 1 time and hold it on the 2nd press. Don't release until step 5.
4. Press the LOCK button of the remote you want to program for a second. A chirp means the system successfully learned the remote.
5. Release the valet button that you've been holding since step 3.
6. Remove key and close door.
Valet 551R Programming Instructions:
1. Open driver's door.
2. Turn key to ON.
3. Press valet button 1 time and hold it on the 2nd press. Don't release until step 5.
4. Press the LOCK button of the remote you want to program for a second. A chirp means the system successfully learned the button.
5. Release the valet button that you've been holding since step 3.
6. Remove key and close door.
7. Open driver's door.
8. Turn key to ON.
9. Press valet button 3 times and hold it on the 4th press. Don't release until step 5.
4. Press the Remote Start button of the remote you want to program for a second. A chirp means the system successfully learned the button.
5. Release the valet button that you've been holding since step 3.
6. Remove key and close door.
Automate 7 HF, Python 450, Sidewinder 3500, Sidewinder 6500HF, Valet 710T, Valet 711T Programming Instructions:
1. Open driver's door.
2. Turn key to ON.
3. Press valet button 8 times and hold it on the 9th. Don't release until step 5.
4. Press the LOCK button of the remote you want to program for a second. A chirp means the system successfully learned the remote.
5. Release the valet button that you've been holding since step 3.
6. Remove key and close door.
Sidewinder 5000HF Programming Instructions:
1. Open driver's door.
2. Turn key to ON.
3. Press valet button 7 times and hold it on the 8th. Don't release until step 5.
4. Press the LOCK button of the remote you want to program for a second. A chirp means the system successfully learned the remote.
5. Release the valet button that you've been holding since step 3.
6. Remove key and close door.