Audiovox Part Numbers: PROOE4BS, PROOE4BSUG, PROOE4BS41, PROOE4BS40, PROOE4BS41PR, PROOE4BS40PR

FCC ID: ELVATOE
Freq: 434 MHz
LED: Red
Buttons: 4
Circuit Board ID: ATDG
Battery: 27A

Works on these Audiovox/Pursuit Systems: PRO9675FT4, PRO9675FT4, PRO-9775, PRO-9800, PRO-9349FT, PRO-98BTKD, PRO9275T, SS-CIT-1, APS800, APS800C, APS875, APS875C, APS875C, APS995, APS995A, APS995C, APS995R, APS996, APS996A, APS996C, APS786, APS686

This remote is discontinued by the manufacturer. You can order any of the remotes below as replacements. If you order one of these replacements, be sure to use the instructions below instead of the instructions that come with the remote.

1. Enter the vehicle, and turn the ignition key to the "on" position.
2. Press the valet button 3 times.
3. The dash L.E.D. will flash one time, and the siren will "chirp" one time, indicating the system is ready to accept programming.
4. Press LOCK on the remote you wish to program and hold it until you hear a chirp confirming the button has been learned but not more than 3 seconds.
5 Press the valet button once.
6. Press UNLOCK on the remote you wish to program and hold it until you hear a chirp confirming the button has been learned but not more than 3 seconds.
7. Press the valet button once.
8. Press Button 3 on the remote you wish to program and hold it until you hear a chirp confirming the button has been learned but not more than 3 seconds.
9. Press the valet button once.
10. Press Button 4 on the remote you wish to program and hold it until you hear a chirp confirming the button has been learned but not more than 3 seconds.
11. Remove the key from the ignition.