Pursuit PRO9344 Remote Programming
To teach more transmitters to your system go through the directions below:
Notice: In order for the system to be ready for programming, it should not be in valet mode. The dash mounted LED illuminates solidly when in valet mode. Should you be in valet mode flip the switch to the other position before beginning.
1. Put your key in the ignition and switch it to the on position.
2. Flick the valet switch THREE times.
3. Push button #1 on the keyfob you wish to program for 3 seconds.
4. Flick the valet switch ONCE.
5. Push button #2 on the remote for Three seconds.
6. Remove key from ignition and then test the transmitter.