Pursuit PRO9250N Remote Programming
To teach more remotes to your vehicle follow the directions below:
Notice: In order for the system to be ready for programming, it should not be in valet mode. The dash mounted LED illuminates solidly when in valet mode. If you're in valet mode flip the switch to the other position before you start.
1. Put your key in the ignition and turn it to the on position.
2. Flip the valet switch THREE times.
3. Push button #1 on the remote you wish to program for Three seconds.
4. Flip the valet switch ONCE.
5. Push button #2 on the fob for Three seconds.
6. Remove key from ignition and then test the transmitter.