Pursuit PRO9246R Remote Programming
To teach spare remote controls to your vehicle adhere to the directions below:

Be aware: In order for the system to be ready for programming, it shouldn't be in valet mode. The dash mounted LED lights up solidly when in valet mode. Should you be in valet mode flip the switch to the opposite position before you begin.

1. Place your key in the ignition and turn it to the on position.
2. Flick the valet switch THREE times.
3. Press button #1 on the transmitter you wish to add for Three seconds.
4. Flip the valet switch ONCE.
5. Push button #2 on the keyfob for 3 seconds.
6. Take out key from ignition and then test the keyfob.