The original remote is no longer made. We are selling a replacement which looks different but works the same.
How to program:
1. Install a 6V alkaline battery inside the KF574. Use Eveready A544, Radio Shack 23-469, or equivalent.
2. Set the Console’s slide switch to INSTALL.
3. Press [ARM] on the KF574. The Console emits a tone. If you do not hear a tone, press the KF574’s [CODE] button with a pencil. Then, repeat this step.
4. To set up additional KF574s (up to eight), repeat steps l-3.
When you set the Console back to RUN it plays back the stored message and the BUSY light stays on for 15 seconds. Note: you can install any combination of Remote Control types (HT544, KF574 or SH624) up to a total of eight Remote Controls. For example: you could install two HT544s. two SH624s and four KF574s. or any other combination up to a total of eight Remote Controls.