Remote For Ford Lincoln Mercury:
This is a remote for some Ford dealership installed remote start systems. The FCC ID is GOH-PCGEN2 and the Ford part number is 7L3J-15K601-AA. This remote has been tested for proper functioning on a keyless entry tester. It has 6 buttons.
A. Open the driver's door (press and hold in brake pedal on Remote Start only system - RMST);
Note: On vehicles with negative polarity door ajar switch input circuits (Refer to the vehicle specific programming section), the door is closed during this step unless door ajar switch input polarity option has been previously changed to negative.
B. Turn the ignition key to ON or RUN position.
C. Press and hold the programming/override button. After 10 secons the horn will chirp 3 times indicating the system is no in programming mode.
D. Release the programming/override button.
E. Press the transmitter button 1 (Lock button on RKE/VSS/RMST, except RMST system which is remote start button) on the remote. The horn will chirp one tome to indicate that the remote has been programmed.
The following vehicles can use this remote when equipped with the dealer installed keyless entry system:
Ford E-150 (2009-2014), Ford E-250 (2009-2015), Ford E-350 Super Duty (2009-2015), Ford E-450 Super Duty (2009-2015), Ford Edge (2009-2010), Ford Escape (2009), Ford Explorer (2009-2010), Ford Explorer Sport Trac (2009-2010), Ford F-150 (2009), Ford Focus (2009), Ford Fusion (2007-2009), Ford Mustang (2009-2010), Ford Ranger (2009-2011), Ford Taurus (2009), Ford Taurus X (2009), Lincoln Mark LT (2007-2008), Lincoln MKX (2007-2010), Lincoln MKZ (2009), Mercury Grand Marquis (2009), Mercury Mariner (2009), Mercury Milan (2009), Mercury Mountaineer (2009-2010), Mercury Sable (2009).