This remote was used by many brands (like Chrysler, Dodge, Ford, Jeep, Lincoln, Mazda, Mercury, Subaru, and more.) This remote works on a remote start add-on system that uses this remote with 1 remote start button in addition to the factory keyless remote.
Remote includes batteries.
Note: Getting a remote with a different logo than your original will not effect usage because the logo is just a sticker. There isn't anything different about the signals transmitted that would effect programming or usage.
1. Turn ignition to ON.
2. Press Programming button 3 times.
3. Press and hold the Remote Start Button on the remote you wish to program for 3 seconds or until the parking lights flash once to confirm.
4. If you have more than one remote repeat step 3 for a total of 4 remotes.
5. Take key out of ignition.