29.95753

Ford

Factory Keyless Entry Remote GQ43VT4T 3165189 4 Button

Tested Before Shipping, Guaranteed To Work

All automobiles that use this remote are onboard programmable.  This indicates that you can program the car to accept new remotes yourself without using special tools or having special knowledge.  Free phone tech support is available if you need it. This rem
FordOld School Ford 4 Button Remote
4.833333015441896
(6) Show Reviews

Ford

Factory Keyless Entry Remote GQ43VT4T 3165189 4 Button

Tested Before Shipping, Guaranteed To Work

Price: $28.46 - $71.25
Select Your Vehicle
Specifications

Item Specifics

Product Type
Regular Remote
Buttons
4
LED
None
Frequency
315 MHz
Remote Programming
Onboard
RF Transmission
1Way
Description

All automobiles that use this remote are onboard programmable.  This indicates that you can program the car to accept new remotes yourself without using special tools or having special knowledge.  Free phone tech support is available if you need it.
This remote features 4 buttons: Lock, Unlock, Trunk, and Panic.  This remote sends it's signals on a frequency of 315Mhz.  This remote will work for your vehicle if your vehicle is equipped with factory keyless entry.
This is a replacement for the factory keyless entry remote on many Ford, Mercury, and Lincoln vehicles.  This remote replaces the following FCC ID: GQ43VT4T.  There ford part number is F5DZ-15K601-B.

The remote is tested before shipping to make sure you are sent a remote that is sending the correct signals and has proper strength.

  • Tested before shipping
  • Guaranteed to work
  • Phone tech support available
  • For more questions about this product, please Contact Us
Additional Information

For 1997-1998 Tracer, 1996-1997 Sable, 1996-1997 Taurus, 1997-1998 Escort:

1. Insert the keys in the ignition and turn the ignition switch from OFF to RUN, up to eight times within ten seconds, ending in OFF. When the vehicle has successfully entered programming mode, it will lock and then unlock all door locks automatically.
(Note: The RUN position is as far as you can turn the key without cranking the engine. If the door locks do not cycle indicating programming mode has been entered, try the procedure without doing step 1 and having the driver door closed. If you still can’t get into programming mode after trying this numerous times both ways then you either do not have the factory keyless entry system or it is not functioning properly. In many vehicles you should end in the RUN position and not the OFF position. If you have anti-theft deterrent then before doing this step you should open the driver door and cycle the power door locks twice. This means you press LOCK, UNLOCK, LOCK, UNLOCK. Step ones says to turn from OFF to RUN up to eight times. If the locks cycle before eight times then move onto step 2 immediately. Do not continue cycling the ignition switch.)
2. Within 15 seconds, press ANY button on a keyless entry remote transmitter. The doors will lock and then unlock to confirm that each keyless entry remote transmitter has been activated.
(Note: When the first keyless entry remote transmitter is programmed, all existing keyless entry remote transmitters are erased.)
3. Repeat step 2 immediately for each transmitter that will operate the vehicle including your old ones (if any.)
4. If the door locks do not respond for any keyless entry remote transmitter, wait 10 seconds and press the button again.
5. Turn the ignition switch to the OFF position or wait up to 30 seconds after step 2, to exit program mode. If a keyless entry remote transmitter has been activated, the vehicle may lock and unlock all doors one last time to confirm.


For 1993-1994 Grand Marquis, 1993-1994 Town Car, 1993-1996 Mark VIII, 1993-1994 Continental, 1994-1996 Mustang, 1993-1994 Crown Victoria, 1995-2000 Contour:

Note: The programming connector is located behind/under the glove compartment (attached to the relay mounting panel or taped to the wire assembly) and is accessed by dropping the glove compartment. It’s a white or light gray plastic connector with two terminals that is not plugged into anything. The color of the two wires leading to the plastic connector is grey/yellow and white/yellow.
1. Put the ignition to ON or ACC and momentarily jump the two program connector terminals with a suitable jumper wire. The system will respond by locking and then unlocking all doors or chirping the horn. After that, remove the jumper wire.
2. Press any button on the first remote. All doors will lock and unlock or horn will chirp to verify programming of that remote.
3. Press any button on each additional remotes (including your old ones) allowing a pause for the door locks to cycle after each remote. The keyless entry system will allow up to four remotes to be programmed.
4. Turn the ignition to OFF. All doors will lock then unlock or the horn will chirp.


For 1993-1995 Sable, 1993-1997 Thunderbird, 1993-1995 Taurus, 1996 Mustang:

Note: The programming connector is located in the trunk on the driver’s side behind the trim panel. It is taped to a wiring harness going to the rear tail light. It’s a white or light gray plastic connector with two terminals that are not plugged into anything.
1. Put the ignition to RUN or ACC and momentarily jump the two program connector terminals with a suitable jumper wire. The system will respond by locking and then unlocking all doors.
2. Press any button on the first remote. All doors will lock and unlock or the horn will chirp to verify programming of that remote.
3. Press any button on each additional remotes (including your old ones) allowing a pause for the door locks to cycle after each remote. The keyless entry system will allow up to four remotes to be programmed.
4. Turn the ignition to OFF. All doors will lock then unlock or the horn will chirp.


For 1993-1997 Cougar, 1997-1998 Mustang:

NOTE: The program connector is located in the trunk, behind the rear left hand side access panel, taped to the wiring harness between the left tail light and the rear left wheel well. It is a plastic connector that is NOT plugged into anything.
1. Put the ignition switch in “RUN” or “ACC” and momentarily jumper the two program connecter terminals with a suitable jumper wire. The system will respond by locking and unlocking all of the doors.
2. Press any button on the transmitter. All doors will lock and then unlock to verify transmitter signal acceptance.
3. Repeat step 2 for each transmitter (including your old ones) in order to program the remote keyless entry module to accept up to four transmitter signals.
4. Turn the ignition switch to “OFF”. All of the doors will then lock and unlock.


For 1993-1997 Probe:

Note: The programming connector is located in the trunk on the passenger’s side behind the trim panel. It is taped to a wiring harness going to the rear tail light. It’s a white or light gray plastic connector with two terminals that is not plugged into anything.
1. Put the ignition to ON or ACC and momentarily jump the two program connector terminals with a suitable jumper wire. The system will respond by locking and then unlocking all doors.
2. Press any button on the first remote. All doors will lock and unlock or the horn will chirp to verify programming of that remote.
3. Press any button on each additional remotes (including your old ones) allowing a pause for the door locks to cycle after each remote. The keyless entry system will allow up to four remotes to be programmed.
4. Turn the ignition to OFF. All doors will lock then unlock or the horn will chirp.


For 1995-2000 Mistique:

Note: The programming connector is located behind/under the glove compartment (attached to the relay mounting panel or taped to the wire assembly) and is accessed by dropping the glove compartment. It’s a white or light gray plastic connector with two terminals that is not plugged into anything. The color of the two wires leading to the plastic connector is grey/yellow and white/yellow.
1. Put the ignition to ON or ACC and momentarily jump the two program connector terminals with a suitable jumper wire. The system will respond by locking and then unlocking all doors or chirping the horn. After that, remove the jumper wire.
2. Press any button on the first remote. All doors will lock and unlock or horn will chirp to verify programming of that remote.
3. Press any button on each additional remotes (including your old ones) allowing a pause for the door locks to cycle after each remote. The keyless entry system will allow up to four remotes to be programmed.
4. Turn the ignition to OFF. All doors will lock then unlock or the horn will chirp.

Application List
ImageSKU / Part NoApplicationDetailPriceAdd to Cart
3050B 3050BFord Contour (1995-2000)$47.50BUY
+ -
3050E 3050EFord Contour (1995-2000)$28.46BUY
+ -
 3050AFord Crown Victoria (1993-1994)$71.25BUY
+ -
3050B 3050BFord Crown Victoria (1993-1994)$47.50BUY
+ -
3050E 3050EFord Crown Victoria (1993-1994)$28.46BUY
+ -
 3050AFord Escort (1997-1998)$71.25BUY
+ -
3050B 3050BFord Escort (1997-1998)$47.50BUY
+ -
3050E 3050EFord Escort (1997-1998)$28.46BUY
+ -
3050B 3050BFord Mustang (1994-1998)$47.50BUY
+ -
3050E 3050EFord Mustang (1994-1998)$28.46BUY
+ -
 3050AFord Mustang (1994-1998)$71.25BUY
+ -
 3050AFord Probe (1993-1997)$71.25BUY
+ -
3050B 3050BFord Probe (1993-1997)$47.50BUY
+ -
3050E 3050EFord Probe (1993-1997)$28.46BUY
+ -
3050B 3050BFord Taurus (1993-1997)$47.50BUY
+ -
3050E 3050EFord Taurus (1993-1997)$28.46BUY
+ -
 3050AFord Taurus (1993-1997)$71.25BUY
+ -
3050E 3050EFord Thunderbird (1993-1997)$28.46BUY
+ -
 3050AFord Thunderbird (1993-1997)$71.25BUY
+ -
3050B 3050BFord Thunderbird (1993-1997)$47.50BUY
+ -
3050E 3050ELincoln Continental (1993-1994)$28.46BUY
+ -
3050B 3050BLincoln Continental (1993-1994)$47.50BUY
+ -
 3050ALincoln Continental (1993-1994)$71.25BUY
+ -
3050B 3050BLincoln Mark VIII (1993-1996)$47.50BUY
+ -
3050E 3050ELincoln Mark VIII (1993-1996)$28.46BUY
+ -
 3050ALincoln Mark VIII (1993-1996)$71.25BUY
+ -
3050B 3050BLincoln Town Car (1993-1994)$47.50BUY
+ -
3050E 3050ELincoln Town Car (1993-1994)$28.46BUY
+ -
 3050ALincoln Town Car (1993-1994)$71.25BUY
+ -
3050B 3050BMercury Cougar (1993-1997)$47.50BUY
+ -
3050E 3050EMercury Cougar (1993-1997)$28.46BUY
+ -
 3050AMercury Cougar (1993-1997)$71.25BUY
+ -
3050E 3050EMercury Grand Marquis (1993-1994)$28.46BUY
+ -
 3050AMercury Grand Marquis (1993-1994)$71.25BUY
+ -
3050B 3050BMercury Grand Marquis (1993-1994)$47.50BUY
+ -
 3050AMercury Mystique (1995-2000)$71.25BUY
+ -
3050B 3050BMercury Mystique (1995-2000)$47.50BUY
+ -
3050E 3050EMercury Mystique (1995-2000)$28.46BUY
+ -
 3050AMercury Sable (1993-1997)$71.25BUY
+ -
3050B 3050BMercury Sable (1993-1997)$47.50BUY
+ -
3050E 3050EMercury Sable (1993-1997)$28.46BUY
+ -
 3050AMercury Tracer (1997-1998)$71.25BUY
+ -
3050B 3050BMercury Tracer (1997-1998)$47.50BUY
+ -
3050E 3050EMercury Tracer (1997-1998)$28.46BUY
+ -
You might be interested in these items
Return Policy

OVERVIEW

At RAK we make returns as easy as possible. Our mission is to provide you with the best products and the best service in the industry. We understand that sometimes, customers change their minds about products that they order or simply do not need them anymore. We also know that customers are cautious about Return Policies since they are often tricky and misleading. Our goal is to make the return or exchange process trustworthy and as simple as 1-2-3.

RETURN POLICY

If for any reason you are not completely satisfied with your purchase, you may return the item within 30 days of delivery of your order.

The following rules apply:

  • Products must be in the same condition we sent it in.
  • Shipping Fees are non-refundable.
  • All returns must be made by signing in, going to MY ACCOUNT, clicking order history, finding the order, click Return this item.There are few non-returnable products & services that may be offered on our website. It will indicate clearly in the product description if a different return policy applies.
  • Order cancellations can only be requested prior to shipment.

RETURN PROCEDURE

To return a product, you must first request a Return Merchandise Authorization (RMA) that is located in the MY ACCOUNT section next to each order item that you want to return.

EXCHANGE PROCEDURE

There are 2 ways you can go about exchanging a product:

  • Option 1 (Slower) - Use the standard return procedure to request an RMA for the part you need exchanged. In your request please specify the exact item(s) you would like to exchange to. Upon receipt of your returned product we will process an exchange and ship the new part. If there is a difference in the price, you will be either refunded or charged the difference.
  • Option 2 (Faster) - Order the new part over the phone and request to include a prepaid label to send back the first purchase for refund.

DEFECTIVE, DAMAGED, OR INCORRECT PRODUCTS

We all know that accidents happen sometimes. If your product(s) will arrive defective, damaged, or simply incorrect, please contact our customer service department as soon as possible. Please do not attempt to use or install the part! We will send you a replacement part and provide you with a prepaid return label to return the defective part. Product(s) must be returned to us within 30 days. If the damage was caused by a shipping courier, we will schedule a damage pick up by the courier.

ORDER CANCELLATIONS

When you request a cancellation of an order or a part it may take up to 24 business hours to process your cancellation claim. This process may involve voiding orders in computer systems, removing items from backorder logs, having operations personnel pull items from production schedules and sometimes stopping orders at the shipping dock. Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of your cancellation.

REFUNDS & CREDITS

After we accept your return, you will be issued a refund via the same payment method as you had originally used to place the order. The refund amount will be composed of the original purchase price minus shipping charges. You will be sent an email confirming receipt of the return and your credit. Please allow an additional 5-7 days for the credit to appear on your account.

Customer Reviews
Share your thoughts with other customers
Login to leave a review

Top Reviews

Very happy

by Merrill D on March 29, 2017
 
 
 
 
 

I was very satisfied with my purchase. Came with directions, over all very pleased.

Was this review helpful to you? yes no

Thanks

by Rich N on April 30, 2017
 
 
 
 
 
Verified Purchase

Remocon replacement works better than original

Was this review helpful to you? yes no

Thanks

by Valued Customer on February 07, 2012
 
 
 
 
 
Verified Purchase

Got it today and is really nice and programed perfect.I am a retired Ford tech and didn't need the program instructions but most of you customers probably do. Thanks.I may get a spare later.

Was this review helpful to you? yes no

CLONE REMOTE

by Valued Customer on December 11, 2008
 
 
 
 
 
Verified Purchase

"This remote is a good clone of the original and was quite easy to setup even if the instructions provided were confusing. "

Was this review helpful to you? yes no

Prefect

by Valued Customer on April 10, 2016
 
 
 
 
 
Verified Purchase

"Perfect in every way. Fast shipping. Easy programming."

Was this review helpful to you? yes no

Five Stars

by Valued Customer on June 13, 2012
 
 
 
 
 
Verified Purchase

It programed to my Ford the first time I tried and works just like the OEM does.

Was this review helpful to you? yes no
See more reviews
Questions & Answers

Don't see what you're looking for?


A

Log into the website, navigate to the order you wish to return. Click "Return This Item." After you complete the form you'll be given return instructions.

By John S on June 06, 2017. 
Was this review helpful to you? yes no
A

If you have any questions please contact us via Live Chat or call 386-586-3650. You can also send a text message (SMS) to 386-586-3650.

By Michael B on June 16, 2017. 
Was this review helpful to you? yes no
A

Yes, as long as programming is done properly.

By Charles R on September 19, 2017. 
Was this review helpful to you? yes no
A

Our specials, coupons, and discounts are constantly revolving. Visit this page for the active deals: https://www.remotesandkeys.com/specials

By Ernesto C on December 07, 2017. 
Was this review helpful to you? yes no
A

Visit this troubleshooting blog: https://www.remotesandkeys.com/blog/troubleshooting

By Forsythia M on December 12, 2017. 
Was this review helpful to you? yes no
A

There are two possible reasons to not see an add to cart button: 1) You haven't made the required choices in dropdowns or buttons near the price. 2) There could be a quote button instead of add to cart if a product is out of stock or if we need to double check availability before placing an order.

By Dave G on December 16, 2017. 
Was this review helpful to you? yes no
See more answered questions

Remotes And Keys is the premier provider of replacement automotive keyless entry remote transmitters, keyfobs, transponder keys, and accessories. We take pride in the quality of our inventory and the amazing people we work with. Feel free to drop us a question or say hi!

SIGN UP FOR OUR NEWSLETTER
and receive special deals and discounts.

CONTACTS

Remotes And Keys
PO Box 290079
Brooklyn, NY 11229

Phone: 386-586-3650
Fax: 718-228-8876

TEASoftware