Buick Oldsmobile Pontiac 10246215 ABO0204T Factory Keyless Remote
Buick Oldsmobile Pontiac 10246215 ABO0204T Factory Keyless Remote

This remote's FCC ID is ABO0204T.  It has four buttons which are LOCK, UNLOCK, TRUNK, and PANIC. This remote transmits at 315 MHz.  GM's part number for this remote is 10246215.  In order to be sure we are sending you a working remo

From: $35.00 View Product
Buick Chevrolet Oldsmobile Pontiac ABO0204T Replacement Case and Button Pad 4 Button
Buick Chevrolet Oldsmobile Pontiac ABO0204T Replacement Case and Button Pad 4 Button

This is a replacement case (shell / housing) and button pad which fits any remote with FCC ID of ABO0204T.  Whether your remote has two, three, or four buttons, this case will fix up your remote.  To use this, open your old rem

From: $10.00 View Product

Keyless Entry Programming Instructions

IMPORTANT: Before beginning the programming routine, have in possession every one of the remotes you want to use on the car. When you enter programming mode, all previous keyfobs will be cleared from the memory. The other keyfobs will not work until you program the key fobs again.

1. Close your car doors.
2. Put key in ignition and turn to ON (As far as you can without starting engine)
3. Switch ignition to OFF and remove the key from the ignition.
4. Press and hold the driver side door lock switch in the UNLOCK position and don’t let go until step 8.
5. Put the ignition key into the ignition lock cylinder and remove the key. (Do not turn the ignition key in the lock cylinder.)
6. Insert the ignition key into the ignition lock cylinder and remove the key. (Do not turn the ignition key in the lock cylinder.)
7. Insert the ignition key into the ignition lock cylinder. (Don't turn the ignition key in the lock cylinder.) Leave the ignition key in the ignition lock cylinder.
8. Release the door lock switch. The automobile will sound three beeps so that you can verify the Programming Mode has been activated.
9. Push the LOCK and UNLOCK buttons in unison on the keyless remote and hold up until the automobile beeps twice to verify that the fob has been successfully programmed (this takes approximately 15 seconds).
10. Reiterate step 9 for each remote you wish to program in addition to your current working remotes. You can program up to four remote controls.
11. Take out the ignition key so that you can exit the Programming Mode.

 

Remotes And Keys is the premier provider of replacement automotive keyless entry remote transmitters, keyfobs, transponder keys, and accessories. We take pride in the quality of our inventory and the amazing people we work with. Feel free to drop us a question or say hi!

SIGN UP FOR OUR NEWSLETTER
and receive special deals and discounts.

CONTACTS

Remotes And Keys
PO Box 290079
Brooklyn, NY 11229

Phone: 386-586-3650
Fax: 718-228-8876

TEASoftware